CHARACTERS   
1. Effectively control inorganic scaling over a wide concentration range, with a maximum allowable LSl value of 2.8 without adding acid
2. Do not agglomerate with iron aluminum oxides and silicon compounds to form insoluble substances
3. It is particularly effective in controlling iron, aluminum, and heavy metal pollutants, and the allowable concentration of iron in the influent can reach 8.0mg/L
4. It can effectively inhibit the polymerization and deposition of silicon, and the concentration of SiO2 in concentrated water can reach 290 mg/
5. Can be used for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes
6. Excellent solubility and stability
7. The pH of the water supply is effective within the range of 5-10

PARAMETERS

DOSE
The dosage of reverse osmosis scale inhibitor and dispersant T-010 is determined based on the comprehensive analysis report of water quality and the calculation of the reverse osmosis system. The general dosage is 0.5-2mg/L, and within the recommended dosage range, most of the following types of scaling can be controlled: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, iron hydroxide, aluminum hydroxide, and silicon.

INSTRUCTIONS   
Pay attention to labor protection during operation, avoid contact with skin, eyes, etc., and rinse with plenty of water after contact.